In most cases, the condensate contains oil and solid particulate impurities. If the compressed air condensate is not discharged out of the conveying and application equipment in time, these impurities will diffuse into the whole compressed air system, resulting in problems in operation, increasing production costs and damaging production equipment and products. The important responsibility of the post-treatment equipment is to remove pollutants and water from the compressed air. Leakage and inadequate control are the main reasons for the waste of energy consumption in the post-treatment system.

我們以往在使用定時器控制排放電磁閥時，同樣也會出現壓縮空氣損失。因為定時器電磁排污閥采用死板僵化的定時工作方式，而不能根據冷凝液積存的實際數量控制排放的間隔時間和每次開閉閥門的精 準時機進行有用排放。當每次排污閥過多頻次或過長時間打開時，很多昂貴且未經使用的壓縮空氣就立即被白白的泄漏到環境中去，特別在寒冷干燥的季節，這種情況造成的能耗浪費尤為嚴重。

In the past, when we used the timer to control the discharge solenoid valve, there will also be compressed air loss. Because the timer electromagnetic blowdown valve adopts a rigid timing working mode, it can not control the discharge interval and the accurate timing of opening and closing the valve for useful discharge according to the actual amount of condensate accumulated. When the blowdown valve is opened too often or for too long, a lot of expensive and unused compressed air will immediately leak into the environment, especially in the cold and dry season.

因為，冷凝液并不是有規律地產生和積聚。而是隨著氣候，季節，環境溫度和濕度，每天的工作時段以及壓縮機的加卸載轉換與滿載率等因素而隨時發生著變化。只有準確實時地對冷凝液進行排放才能避免不必要的能耗浪費和損害。采用電子液位控制的高品質的零氣耗自動冷凝液排水器正是通過電容式液位傳感器實現了這個目的。智能液位電子控制系統有用的避免了壓縮空氣的損失，做到冷凝液的及時排放，并保證了小化輸入電能的需求。

Because the condensate is not generated and accumulated regularly. However, it changes at any time with climate, season, ambient temperature and humidity, daily working hours, loading and unloading conversion and full load rate of the compressor. Only when the condensate is discharged accurately and in real time can unnecessary energy consumption waste and damage be avoided. The high-quality zero gas consumption automatic condensate drain with electronic liquid level control realizes this purpose through capacitive liquid level sensor. The intelligent liquid level electronic control system can effectively avoid the loss of compressed air, discharge the condensate in time, and reduce the demand for input electric energy.