中文字幕乱人伦视频在线_国产a∨国片精品白丝美女视频_制服丝袜长腿无码专区第一页_久久99精品国产99久久

公司新聞

當前位置:首頁 > 新聞中心 > 公司新聞

羅茨鼓風機曝氣不足的現象

來源:http://bywang.cn/   日期:2021-06-08   瀏覽量:0
TAG:山東制氮機,山東干燥機,山東螺桿鼓風機,山東空壓機,山東自動排水器
如果有羅茨鼓風機曝氣不足的現象,則會導致整個污水處理流程受到影響,那我們來分析一下具體原因吧
If there is insufficient aeration in Roots blower, the whole sewage treatment process will be affected. Let's analyze the specific reasons
1.羅茨鼓風機參數選型錯誤
1. Wrong selection of Roots blower parameters
如果在羅茨鼓風機選型的時候壓力不足,或者污水處理量比實際選型大的話,就會引起曝氣不足的情況發生。這樣的情況需要我們提供準確的壓力和流量參數,讓羅茨風機廠家匹配合適的羅茨鼓風機。
If the pressure is insufficient in the selection of Roots blower, or the sewage treatment capacity is larger than the actual selection, it will cause insufficient aeration. In this case, we need to provide accurate pressure and flow parameters, so that the roots blower manufacturers can match the appropriate roots blower.
2.曝氣盤故障
2. Aeration tray failure
如果在處理污水的過程中曝氣盤堵塞,而且出現大量堵塞的情況,則會導致曝氣量不足或是曝不出氣。這種情況需要我們及時更換 新的曝氣盤即可。
If the aeration plate is blocked in the process of sewage treatment, and a lot of blockage occurs, it will lead to insufficient aeration or no aeration. In this case, we need to replace the new aeration tray in time.
山東螺桿鼓風機
3.羅茨鼓風機零件故障
3. Roots blower parts failure
羅茨鼓風機長時間運行就會出現零件老化腐蝕,出現聲響或者其他問題,有時候就會曝氣量減少或是不能曝氣。這樣需要我們定時檢修,注重羅茨鼓風機的保養。
If roots blower runs for a long time, parts will be aging, corrosion, noise or other problems will occur, and sometimes the aeration capacity will be reduced or aeration can not be achieved. So we need regular maintenance, pay attention to the maintenance of Roots blower.
4.管道損壞
4. Pipeline damage
在羅茨鼓風機污水池曝氣的時候,出現管道堵塞的情況,會影響曝氣量;管路的長短還有彎道的多少,也會影響曝氣量。
When roots blower sewage tank is aerated, the pipe blockage will affect the aeration rate; The length of the pipeline and the number of bends will also affect the aeration rate.
以上即是羅茨風機曝氣不足情況的分析,如有技術難題請咨詢我們來解答。
The above is the analysis of insufficient aeration of Roots blower. If you have any technical problems, please consult us.

上一篇:夏季空壓機保養定時保養的重要性
下一篇:真空干燥機出現溫度差別該如何處理