自動排水器出現積水的三種解決方法

空壓機壓縮后的氣體有一部分被存儲在儲氣罐中，而空氣里是含有大量的水分子，當這些高速運動的水分子碰到儲氣罐壁時，會凝結成水，經過一段時間的積累，底部會出現大量的水。

Part of the compressed air is stored in the air tank, and the air contains a lot of water molecules. When these high-speed water molecules touch the air tank wall, they will condense into water. After a period of accumulation, a lot of water will appear at the bottom.

壓縮空氣自動排水器有水這個情況，這一種現象是很正常的，了解儲氣罐起的作用和工作原理，要知道在機器的運轉過程中，它能給我們空壓機提供緩沖的空間，減小脈沖，穩定電壓，機器也因為它的一個緩沖而不必重復啟動，減少耗電量。接下來廠家小編為大家解答空壓機儲氣罐有水的三大處理方法。

The compressed air automatic drainer has water. This phenomenon is very normal. Understand the function and working principle of the air tank. In the process of machine operation, it can provide buffer space for our air compressor, reduce the pulse and stabilize the voltage. Because the machine is a buffer, it does not have to start repeatedly to reduce power consumption. Next, the small manufacturers for you to answer the air compressor storage tank water three treatment methods.

通過自動排水器的工作原理我們可以知道，儲氣罐中有水是正?，F(xiàn)象，接下來就是如何處理這些水的問題，形成的水我們需要及時的排出，因為它不僅僅影響空氣質量，還會銹蝕掉容器。在這里介紹下處理這些水的三種方法：

Through the working principle of the automatic drainer, we can know that water in the air tank is a normal phenomenon. The next step is how to deal with the problem of water. We need to discharge the water in time, because it not only affects the air quality, but also corrodes the container. Here are three ways to treat the water

1、可以在儲器罐安裝一個氣水分離器，將壓縮空氣中的氣水分離。

1. A gas water separator can be installed in the storage tank to separate the gas and water in the compressed air.

2、在排污口處安裝一個自動排水器，對這個自動排水器的選擇也是有要求的，低劣排水器很容易堵塞。

2. An automatic drainer is installed at the sewage outlet, and the selection of the automatic drainer is also required. The inferior drainer is easy to block.

3、管路設計是否合理，壓縮空氣管路一般要求傾斜1度左右，從系統管線進入的話最好是進儲氣罐的管路接口道的上方，做一個做一個一百八十度的彎脖向下在接到儲氣罐進口即可。

3. Whether the pipeline design is reasonable or not, the compressed air pipeline is generally required to be inclined about 1 degree. If it enters from the system pipeline, it is better to make a 180 degree bend neck above the pipeline interface of the air storage tank and connect it to the inlet of the air storage tank.

以上就是小編為大家介紹的關于自動排水器出現的積水我們解決的三種方法。希望可以幫助到大家，更多的精彩內容請關注：http://bywang.cn。

The above is the small series for you to introduce about the automatic drainer appear ponding, we solve the three methods. I hope I can help you. For more wonderful content, please pay attention to: http://bywang.cn .